binderholz Mass Timber Manual

Layup BBS XL 1) Thickness Lamination actual Thickness 2) II Ʇ II Ʇ II Ʇ II 60-3s [mm] 60 20 20 20 [in] 2.36 0.79 0.79 0.79 80-3s [mm] 80 20 40 20 [in] 3.15 0.79 1.57 0.79 90-3s [mm] 90 30 30 30 [in] 3.54 1.18 1.18 1.18 100-3s [mm] 100 35 30 35 [in] 3.94 1.38 1.18 1.38 120-3s [mm] 120 40 40 40 [in] 4.72 1.57 1.57 1.57 100-5s [mm] 100 20 20 20 20 20 [in] 3.94 0.79 0.79 0.79 0.79 0.79 120-5s [mm] 120 20 30 20 30 20 [in] 4.72 0.79 1.18 0.79 1.18 0.79 140-5s [mm] 140 40 20 20 20 40 [in] 5.51 1.57 0.79 0.79 0.79 1.57 140-5s-2 [mm] 140 20+20 20 20 20 40 [in] 5.51 0.79+0.79 0.79 0.79 0.79 1.57 140-5s-3 [mm] 140 20+20 20 20 20 20+20 [in] 5.51 0.79+0.79 0.79 0.79 0.79 0.79+0.79 160-5s [mm] 160 40 20 40 20 40 [in] 6.30 1.57 0.79 1.57 0.79 1.57 160-5s-2 [mm] 160 20+20 20 40 20 40 [in] 6.30 0.79+0.79 0.79 1.57 0.79 1.57 160-5s-3 [mm] 160 20+20 20 40 20 20+20 [in] 6.30 0.79+0.79 0.79 1.57 0.79 0.79+0.79 180-5s [mm] 180 40 30 40 30 40 [in] 7.09 1.57 1.18 1.57 1.18 1.57 180-5s-2 [mm] 180 20+20 30 40 30 40 [in] 7.09 0.79+0.79 1.18 1.57 1.18 1.57 180-5s-3 [mm] 180 20+20 30 40 30 20+20 [in] 7.09 0.79+0.79 1.18 1.57 1.18 0.79+0.79 200-5s [mm] 200 40 40 40 40 40 [in] 7.87 1.57 1.57 1.57 1.57 1.57 200-5s-2 [mm] 200 20+20 40 40 40 40 [in] 7.87 0.79+0.79 1.57 1.57 1.57 1.57 200-5s-3 [mm] 200 20+20 40 40 40 20+20 [in] 7.87 0.79+0.79 1.57 1.57 1.57 0.79+0.79 220-5s [mm] 220 20+40 3) 30 40 30 40+20 3) [in] 8.66 0.79+1.57 3) 1.18 1.57 1.18 1.57+0.79 3) 240-5s [mm] 240 20+40 3) 40 40 40 40+20 3) [in] 9.45 0.79+1.57 3) 1.57 1.57 1.57 1.57+0.79 3) 260-5s [mm] 260 40+40 3) 30 40 30 40+40 3) [in] 10.24 1.57+1.57 3) 1.18 1.57 1.18 1.57+1.57 3) 280-7s [mm] 280 40 40 40 40 40 40 40 [in] 11.02 1.57 1.57 1.57 1.57 1.57 1,57 1,57 For SI: 1 in. = 25.4 mm 1) binderholz CLT BBS layups are developed using visually graded sawn lumber noted in Section 3.2.1 of evaluation report CLT Handbook, US Edition, FPInnovations. 2) Actual thickness of lamination after planing. „II“: Face laminations are oriented parallel to the major strength direction and „ Ʇ “: Face laminations are oriented perpendicular to the major strength direction. 3) Two laminations with wood grain orientation running in the same direction CLT BBS XL | PANEL LAYUPS TABLE 8 - BINDERHOLZ CLT BBS XL PANEL LAYUPS